The Siemens S7 MPI PC Adapter was designed specifically for use with Siemens S7 300 and 400 PLCs communicating via the MPI interface connected on the Serial RS232 port. The Siemens S7 MPI serial port adapter handles MPI connectivity on the PC.
This driver supports VIPA PLCs through Green Cable as well.
Any other device compatible with the S7-MPI protocol is supported.
The Siemens S7 MPI PC Adapter and the S7 MPI driver have been designed to allow more than one master device to exist on the network. This allows a programming package to operate while this driver is running or while additional PCs are accessing the network.
Release
11.4.1.2 DBL268
Interface Device
Simatic-S7-300 - 400
Manufacturer
Siemens
Requirement/Description
Siemens S7 - MPI protocol for PC Adapter - SIMATIC PLCs S7-300/400 series
License Code
License Code Not required
Import Tags
Support Import Tags
Operating System
WIN 32/64
Win CE
Downloads
|
|
|
For more information on this driver please refer to the help relating to the driver in Movicon 11.