ID |
TOPIC |
FIXES |
17974 |
Accelerator Resources |
In certain overstressed CPU conditions
or when low performing devices were being used, the blink
animations in objects would go out of sync.
|
17827 |
Data Loggers Management |
When pasting and copying a Data
Logger Column, a new column was created with the name
of another column if selected while completeing the copy
and paste operations.
|
18115 |
Design |
The 'User Dialogs' library symbols
would not create variables correctly once inserted in
the project and therefore the symbols would not function
properly.
|
17824 |
Design |
When resizing an object, its sizes
would modify with a tilted effect in respect to the resizing
reference points.
|
17948 |
Design |
When setting the 'False' value
within the VBA context of the Alarm Window, the 'bRet'
parameter in the 'OnInsentOrUpdateAlarm' event would not
inhibit alarms from displaying in the Alarm Window. .
|
17930 |
OPC Communication |
When the secondary server activated
In a redundancy and OPC DA communication configuration,
it was unable to write in the OPC Server.
|
17548 |
OPC Communication |
Connecting to a CoDeSys or B&R
OPC UA Server which exposed a structure deployed in the
Address Space as OpcUa_NodeClass_Variable instead as OpcUa_NodeClass_Object,
the data selection window would not show the structure
variable.
|
17117 |
Redundacy |
When a network connection error
occurred between the Primary and Secondary Server while
communicating with a OPC Server, the Secondary would send
data that had not been updated to the Primary, such as
variable zero values, once the Networking communication
was restored.
|
16578 |
Screen Management |
When opening a PopUp, the data
in the window underneath would not update. In addition,
when the Password request window opens, notification to
the objects are briefly interrupted independently from
the value set in the [General\DynObjPumpIteration] key
that is now exclusively used for slowing down the variation
notifications to the object, This is very useful
for hardware with insufficient resourses. The default
value is now '0'.
|
17808 |
Screen Objects |
Clicking on overlapped objects
would open the password request window if enabled in the
object directly underneath the one clicked on.
|
17688 |
Screen Objects |
An object would only start being
dragged when the mouse reached its border. Now the
dragging process starts immediately once the object is
selected to do so.
|
17554 |
Screen Objects |
When zooming a screen with objects
enabled with the Dragging function, the set dragging limits
would not change as a consequence to the zooming operations
if the object was moved.
|